Characterizing the optimal operation of photocatalytic degradation of BDE-209 by nano-sized TiO2

Brominated flame retardants have been widely used in industry. There is a rapid growing public concern for their availabilities in the environment. Advanced oxidation process (AOP) is a promising and efficient technology which may be used to remove emerging chemicals such as brominated flame retardants. This project aims at investigating optimal operational conditions for the removal of BDE-209 using nano-scaled titanium(IV) oxide. The residual PBDE congeners after photocatalytical degradation of BDE-209 by TiO₂ were analysed by gas chromatography-mass spectrometry (GC-MS). It was found that the degradability of BDE-209 by TiO₂ was attributed to its photocatalytic activity but not the small size of the particles. The half-life of removing BDE-209 by TiO₂ was 3.05 days under visible light. Tetra- and penta-BDEs were the major degraded products of BDE-209. Optimum conditions for photocatalytical degradation of BDE-209 was found to be at pH 12 (93% ± 1%), 5, 10, 20 mg/L (93.0% ± 1.70%, 91.6% ± 3.21%, 91.9% ± 0.952%, respectively), respectively of humic acid and in the form of anatase/rutile TiO₂ (82% ± 3%). Hence, the efficiency of removing BDE-209 can be maximized while being cost effective at the said operating conditions.     

Performance of the hybrid growth sequencing batch reactor (HG-SBR) for biodegradation of phenol under various toxicity conditions

Hybrid growth microorganisms in sequencing batch reactors have proven effective for treating the toxic compound phenol, but the toxicity effect under different toxicity conditions has rarely been discussed. Therefore, the performance of the HG-SBR under toxic, acute and chronic organic loading can provide the overall operating conditions of the system. Toxic organic loading(TOL) was monitored during the first 7 hr while introducing50 mg/L phenol to the system. The system was adversely affected with the sudden introduction of phenol to the virgin activated sludge, which caused a low degradation rate and high dissolved oxygen consumption during TOL. Acute organic loading(AOL) had significant effects at high phenol concentrations(600, 800 1000 mg/L). The specific oxygen uptake rate(SOUR) gradually decreased to 4.9 mg O_2/(g MLVSS·hr) at 1000 mg/L of phenol compared to 12.74 mg O_2/(g MLVSS·hr) for 200 mg/L of phenol. The HG-SBR was further monitored during chronic organic loading(COL) over 67 days. The effects of organic loading were more apparent at 800 mg/L and 1000 mg/L phenol concentrations, as the removal range was between 22%–30% and 18%–46% respectively, which indicated the severe effects of COL.     

Estimation and inter-comparison of dust aerosols based on MODIS, MISR and AERONET retrievals over Asian desert regions

This study presents detailed analysis of spatiotemporal variations and trend of dust optical properties i.e., Aerosol Optical Depth(AOD) and Angstrom component over Asian desert regions using thirteen years of data(i.e., 2001–2013) retrieved from Aerosol Robotic Network(AERONET), Moderate Resolution Imaging Spectroradiometer(MODIS) and Multi-angle Imaging Spectroradiometer(MISR). These regions include Solar Village, Dunhuang and Dalangzadgad and are considered as origin of desert aerosols in Asia. Mann–Kendall trend test was used to show the trend of AOD. The relationship of AOD with weather parameters and general AOD trend over different wavelengths has also been shown. AOD's trend has been observed significant throughout the year in Solar Village, while in Dunhuang and Dalanzadgad the significant trend has been found only in peak period(March–June).Analysis show high values of AOD and low values of angstrom in Solar Village during peak period. In Chinese desert regions, high values of AOD have been found during peak period and low values in pre-peak period. Significant relationship has been observed between AOD and average temperature in Solar Village and Dalanzadgad whereas rainfall and wind speed showed no significant impact on AOD in all desert regions.     

Lobar holoprosencephaly: prenatal MR diagnosis with postnatal MR correlation

Holoprosencephaly is a congenital anomaly characterized by lack of cleavage of the prosencephalon. Although, relatively rare, it is the most common anomaly that involves both the brain and the face. Prenatal diagnosis of this anomaly using ultrasonography, particularly of the less severe forms, is difficult. Magnetic resonance imaging has recently become an important complement to US in prenatal diagnosis of CNS anomalies. We herein report a patient in whom, at 23 weeks of gestation, US suggested agenesis of the corpus callosum and in whom, at 24 weeks of gestation, MRI correctly diagnosed lobar holoprosencephaly, which was confirmed by a postnatal MRI at 3 weeks of age. Copyright © 2005 John Wiley & Sons, Ltd.     

Influence of flue-gas desulfurization systems on coal combustion by-product quality at kentucky power stations burning high-sulfur coal

Two Kentucky power plants burning similar blends of high-sulfur western Kentucky and southern Indiana coal provide a unique opportunity to examine the variations in coal combustion by-products due to differences in the method of wet flue-gas desulfurization (FGD). One plant employed carbide lime-based scrubbing for two units and a dual-alkali process for the third unit. The second plant employed a Mississippian limestone from Kentucky for all four units. This study provides an example of optical and SEM petrographic techniques, supplemented by chemical analyses, applied to the study of, at least from the geologic perspective, non-traditional materials. The coal sources comprise a blend of high volatile C and B bituminous, high vitrinite (85–90%, mmf), high-sulfur (> 3%, dry) coals. The fly ash is dominated by glassy phases (70–80%) with about 5–10% spinel (predominately magnetite), 3–10% quartz, and 4–10% isotropic coke comprising the remaining portion of the ash. SEM observations indicate that the glassy particles exhibit a bimodal size distribution with sub-micron glass spheres and a population of larger (several 10s of microns) spheres. The bottom ash has higher proportions of spinels and mullite, with negligible carbon forms, compared to the fly ash from the same units. Fly ashes were observed to be lower in Fe and higher in Al, Si, and S compared to the bottom ashes. Carbide lime, a by-product of acetylene manufacture, soda ash, and limestone were the reagents used in the flue-gas desulfurization processes. The primary FGD by-product is a calcium sulfite slurry which is vacuum filtered and mixed with fly ash and, usually, lime, to form a stable product for disposal. The FGD by-products have some potential, as yet unrealized, for utilization.     

Germination,Growth, and Nodulation of Sesbania rostrata Grown in Pb/Zn Mine Tailings

Sesbania rostrata in pure and amended Pb/Zn tailings. About 90% of seeds of S. rostrata germinated in pure Pb/Zn tailings, which contained high concentrations of Pb, Zn, Cu, and Cd. Although seedling growth suffered from the adverse environment of Pb/Zn tailings, they became established on tailings stands, in the greenhouse, as well as on the actual tailings dam, and completed their life cycle in 4 months. Dry matter production and nitrogen accumulation was 3200 kg/ha and 69.4 kg/ha, respectively in the actual tailings dam. Applying inorganic fertilizer to Pb/Zn tailings led to no obvious improvement in growth and nodulation of S. rostrata, while tailings amended by river sediment or domestic refuse rich in organic matter improved the growth and nodulation of the species. Azorhizobium caulinodans survived and formed N-fixing stem and root nodules in S. rostrata grown in pure Pb/Zn tailings with a nodule biomass exceeding 300 mg fresh matter per plant.     

Risk assessment of heavy metal contamination in shrimp farming in Mai Po Nature Reserve, Hong Kong

An ecological survey was carried out to determine the sediment concentrations of nutrients and heavy metals and bioaccumulation of heavy metals in fish and shrimp including tilapia (Oreochromis mossambicus×O. nilotica), grey mullet (Mugil cephalus), gei wai shrimp (Metapenaeus ensis) and caridean shrimp (Macrobrachium nipponensis) in the traditional tidal shrimp ponds (gei wais) of Mai Po Nature Reserve, Hong Kong. The sediments collected from the landward sites contained higher nutrient contents, as well as zinc (Zn), chromium (Cr), copper (Cu), nickel (Ni) and cadmium (Cd) than those collected from the seaward sites, but vice versa for lead (Pb) and mercury (Hg). However, the concentrations of all metals were exceptionally high in the two sites located outside the reserve, suggesting that waters from Deep Bay might be the possible source of metal contamination affecting the reserve. All metals studied seemed to accumulate in the viscera of fish. Body size was the determining factor for the accumulation of heavy metals in caridean shrimp and gei wai shrimp but not fish. Concentrations of the metals studied in tissues of grey mullet and gei wai shrimp were found to be safe for human consumption. Concentrations of Cr in tilapia whole body (0.68–1.10 mg kg⁻¹ wet weight) were close to or over the guideline value of 1 mg kg⁻¹ set by the Food Adulteration (Metallic Contamination) Regulations of Hong Kong. Tilapia flesh and small caridean shrimp collected from gei wais were contaminated by Cr and Pb but still fit for human consumption. Caution is required if large caridean shrimp is to be consumed in large amounts continuously because the concentration of Pb exceeded the maximum permitted concentration (6 mg kg⁻¹). The rather high Cr concentrations in tilapia whole body should not be overlooked as the fish will serve as a food source for migratory birds visiting the site.     

Influences of macroalga-derived dissolved organic carbon on the aquatic toxicity of copper and cadmium

In this study, the effect of dissolved organic carbon (DOC) derived from macroalga (Sargassum) on the acute toxicity of copper (Cu) and cadmium (Cd) to a freshwater cladoceran (Daphnia magna) was investigated. Potassium-loaded macroalga was incubated with ultrapure water to extract macroalgal DOC, which was then spiked with the constituents of the Elendt M7 hard water media. The 48 h median lethal concentration of Cu increased linearly with DOC levels but that of Cd was relatively independent of DOC levels (0-44 mg l(-1)). The independence of Cd toxicity on DOC level might be due to the competitive effect of high calcium concentrations in the media with Cd for the binding sites of DOC. The decreased Cu toxicity was a result of reduced Cu uptake as evidenced in a separate accumulation test. Also, the capability of the macroalgal DOC on reducing Cu toxicity was found to be comparable to DOC tested in other studies. Therefore, the present study suggested that the biosorption treatment process using macroalgae should consider the effect of DOC release from the biomass as a step of modifying the metal toxicity as well as influencing metal biosorption capacity.